Les dépôts pour Radioamateur.ca > Le dépôt de nouvelles pour Radioamateur.ca
Quelques Nouvelles provenant du Hamvention 2017 - Nouveaux Produits
(1/1)
VE2UGO Hugo:
Voici quelques produits présentés en avant première et exhibés au Hamvention
Icom ID-4100
Présenté un peu plus tôt ce mois-ci, il pose fièrement au Hamvention
Flex 6400 et 6600
Flex 6600: Entre 4000$ et 5000$(Version M) US
Flex 6400: Entre 2000$ et 3000$(Version M) US
Modular Design
Both new models (6400/6600) are in a taller case which allows for a modular construction of the radio which in turn will lead to easier and faster servicing due to boards being able to be unplugged and replaced rather than surface-mount reworking being needed to replace faulty components.
Flex ‘M’ series is exactly the same as the flex 6400/6600 with a traditional radio front panel (Flex Maestro style) for those that prefer the look and feel of the ‘classic’ Ham radio. However, as with the existing Flex 6000 models, the Flex ‘M’ can still be used with an additional Flex Maestro in order two operators can use the same radio on different bands at the same time.
Improved Receiver Performance
Despite the fact the existing 6000 series models have excellent receiver performance, Flex Radio have pushed the boundaries once again to nudge performance up a little to ensure they stay right at the top of the pile in terms of receiver performance (Sherwood Engineering independent receiver performance comparison).
Now with 2 SCU’s (Spectral Capture Units) 6600 models only
This is a massive feature which until now has only been available on the flagship model, the Flex 6700. With two SCU’s SO2R (Single Operator, 2 Radios) operation is possible with two operators working 2 bands simultaneously. Most important of all, these operators can use different antenna sockets too. With a single SCU radio, up to 4 slice receivers can be used but only with a second SCU can an additional antenna socket be selected for one or more of the sub-band slices. Single SCU radios will have to operate with all slices on the same antenna socket.
Preselectors Standard on Flex 6400
Preselectors (Band Pass Filters or BPF) were not an option on the flex 6300 (which is now replaced by the 6400 series) and yet not they are a standard option on both the Flex 6400 and Flex 6400M models
Flex 6400 has 4 Slice Receivers
The Flex 6300 had 2 slice receivers as standard and this could not be increased. Anyone wanting up to 4 slices, needed to upgrade to the flex 6500. The flex 6400 has been upgraded to include 4 slice receivers as a standard feature.
Now with DUAL Preselectors! Flex 6600 models only
The 6500 has a single set of preselectors (Band Pass Filters or BPF) which can improve receiver performance on a single band. However, each SCU on the Flex 6600M can be stretched across a 14MHz section of band. If two or more slices where spread across multiple bands, the BPF would have to be switched off which could affect receive performance. Additionally, if using 2 antenna sockets across 2 or more slice receivers, only one of those would be able to have a BPF in place. By adding 2 BPFs, 1 BPF can be used per slice to ensure receiver performance remains uncompromised.
SmartSDR Version 2
While SmartSDR can be used on any Flex 6000 series, it is provided free of charge on the 6600. With ground-breaking single-click remote operation, Flex Radio have taken remote station operation to the next level by providing more users than ever with an easy route in.
VE2UGO Hugo:
Quelques produits adaptés aux radios Elecraft à surveiller.
AlexMic
SPECIFICATIONS
Max audio output: 2.5w
Mic sensitivity: -42 +/-3dB
Size: 87x63x36 mm
Weight: 200 g
DC Input voltage: 5V
Working time: >= 8Hr
Frequency response: 200Hz-8KHz
KEY FEATURES:
Water-proof IP56
Built-in audio amplifier
PU reinforced cable
Built-in lithium battery
Long working time
ACCESSORIES:
Charging cable
Soft Case (optional)
ProAudioEngineering
Heatsink avec fan intégré - KX32 avec KX32Fan et Kx21 (3-cell DC Charger)
https://proaudioeng.com/pae-kx32-ultimate-heatsink-kit-elecraft-kx3/
QRPWorks
SideKar Plus et Key Line Pi
New! Your request for a SideKar with a bigger screen has been fulfilled. By popular demand, the SideKar Plus will debut at Hamvention (booth 1611). The SideKar Plus sports at 4 line, 80 character screen, double that of the SideKar. Now you can read more decoded CW, PSK and RTTY text at a glance. The information below applies to both the SideKar and SideKar Plus. Just pick your size.
Key Line Pi which is a mounting bracket for attaching the KXPD2 or KXPD3 paddles to either the KX2 or KX3. The Key Line Pi allows the paddle to be swiveled over a 45 degree range left and right to allow the operator to have a more comfortable keying position.
http://www.qrpworks.com/sidekar--sidekar-plus.html
http://www.qrpworks.com/key-line-pi.html
GEMS Products
KX2, KX3, PX3 Mount
KX2 Heat Sink (Complete Set both ends)
84.90$
KX2 Heat Sink (Right End only)
$64.90
KX2 Tall Leg
VE2UGO Hugo:
Elad
VE2UGO Hugo:
CommRadio
CTX-10
http://www.commradio.com/
Navigation
Sortir du mode mobile