Auteur Sujet: Une méchante machine!!!!  (Lu 6072 fois)

Hors ligne VE2UGO Hugo

  • Membre guru
  • *****
  • Messages: 871
  • Rapid Deployment Amateur Radio
    • http://files.qrz.com/m/kd4sm/life.jpg
Une méchante machine!!!!
« le: 01 Avril 2015, 20:20:36 »
Me semble quelle a des airs de ressemblance...  ;D


Hors ligne VE2DSK Réal

  • Membre sénior
  • ****
  • Messages: 254
Re : Une méchante machine!!!!
« Réponse #1 le: 02 Avril 2015, 18:11:17 »
Me semble quelle a des airs de ressemblance...  ;D

 Photos montage d'un TS-990 avec autre model...

 ..si ça existerai, on l'aurait...    Réal

Hors ligne VE2VMC Martin

  • Membre sénior
  • ****
  • Messages: 478
Re : Une méchante machine!!!!
« Réponse #2 le: 02 Avril 2015, 18:33:41 »
Nouveau modèle de Icom avec 24dsp de 128bits, 6 récepteurs indépendants, PC intégré avec processeur 22 cores et 347m Ram et puissance de sortie de 1.5KW  ;D
Long : -74.1556 W (-74° 9' 20'' W)
Lat : 45.2834 N (45° 17' 0'' N)
QTH locator : FN25WG

La loi de Murphy dit: "La pire chose qui peut arriver va toujours arriver au pire moment"
À mon avis, Murphy était un optimiste ...

Hors ligne VE2UGO Hugo

  • Membre guru
  • *****
  • Messages: 871
  • Rapid Deployment Amateur Radio
    • http://files.qrz.com/m/kd4sm/life.jpg
Re : Une méchante machine!!!!
« Réponse #3 le: 02 Avril 2015, 20:37:28 »
C'est un IC-7800 + FTDX-9000 + TS-990! Tout un mixte!!!!  :o

C'était pour le 1er avril... mise en vente supposément sur Ebay  ;D

Hors ligne VA2JOT Jacques

  • Membre guru
  • *****
  • Messages: 3 825
Re : Une méchante machine!!!!
« Réponse #4 le: 03 Avril 2015, 06:29:47 »
Tiens, tant qu'à en beurrer épais, ajoutes-donc l'item suivant que je viens de découvrir dans les puces de ce matin: (22) 200 pieds CÂBLE HÉLIAX LMR-400   100$ 

Ce câble est révolutionnaire, il est élastique mais il faut mettre à un bout, ces connecteur d'Héliax de type Superflex et à l'autre des connecteurs de LMR-400 sinon il perd complètement ses propriétés élastiques ;-)

Hors ligne VE2UGO Hugo

  • Membre guru
  • *****
  • Messages: 871
  • Rapid Deployment Amateur Radio
    • http://files.qrz.com/m/kd4sm/life.jpg
Re : Une méchante machine!!!!
« Réponse #5 le: 03 Avril 2015, 14:17:30 »
Salut Jacques!
Je l'avais également remarqué dans les puces ;)

Pour faire du pouce sur ton histoire de coax, en voici une que j'avais reçu le 1er avril également!
----------

Inverted High Frequency Loss with LMR-450G‏

PERFORMANCE  TESTS  -  LMR-450G
The recently announced LMR-450G cable has aroused much curiosity since its characteristics have not been collectively available by any one source.  By multiple inquiries to several manufactures (only three at this time) and numerous lab tests, we hope to put many of the existing questions to rest.

DESCRIPTION
The physical make up of this cable varies slightly from most conventional RF cables.  The center conductor is a semi-stranded copper alloy surrounded by Telfon, which will absorb and distribute cable 'hot spots' caused by excessive standing wave.  The double silver braid and foil outer coating which provides a 98.6% shield is what the inverted high frequency loss characteristics are attributed.  The loss is substantially less as the frequency increases, making this cable especially attractive for UHF, cellular, PCS and microwave applications.


Measuring cable loss under lab conditions

LOSS PER 100'
30 MHz     2.4 db
50 MHz     2.1 db
150 MHz    1.6 db
450 MHz    1.1 db
800 MHz    .51 db
1200 MHz  .37 db
1950 MHz  .31 db

The cable's most unique property is attributed to the outer jacket material Neo-glow, an RF sensitive composite plastic which will visibly indicate RF 'hot spots' in the cable.  Adjusting the cable length to the antenna system for the 'perfect' impedance match is crucial at high frequency, thus the importance of a low SWR for peak performance.


From 100 Watts and up this cable will brighten up your world.

PROPER  INSTALLATION
The low level emission of light from LMR-450G cable can be enhanced by wearing lightly tinted sunglasses with UV protection, which enhances the light radiation from the cable.  Select an approximate length of cable needed for the installation which must be multiples of a 1/4 wavelength for the desired frequency.  The exact length can be determined by using the formula 467 / Freq (MHz) plus approximately 18 inches.

The initial tests should be run with a 50 ohm dummy load at one end of the cable.  With a minimum of 7 watts from the transmitter, you will see a faint glow from the cable indicating the 'hot spots' to be eliminated.  These are the points along the cable where the RF is at its maximum.  It is at these points where the RF connectors should be mounted.  Trimming the excess cable may be required at both ends of the cable to produce the most effective match.  Use caution not to trim too much cable as the loss characteristics improve with longer cable lengths.

SUMMARY
This could be the beginning of the long awaited high frequency "SUPER" cables.  Only available in limited quantities at this time; contact your local cable supplier for more details.