June 17, 2013
Now accepting orders for the Elecraft KXPA100 100 W AmplifierWe have received FCC certification and are putting on the finishing touches and performing our field test on the KXPA100. We're now taking orders for deliveries
planned to start in the next 60 days (mid to late August).KXPA100 features include:
100 W output on 160-6 m with 5 W input typical
13.8 VDC powered; 20 A typical current drain (11 V with lower output. 15 V max)
7 lbs with KXAT100 installed. 10 x 5.125 x 4.25"
Compact unit ideal for both desktop and mobile use
Solid-state diode T/R switching — fast, silent T/R and QSK
Large convection-cooled heat sink for reliable and quiet operation
Modern design with rugged MOSFET output stage
Internal wide-range automatic antenna tuner (KXAT100 ATU option)
Second antenna jack provided with KXAT100 ATU option; controlled by KX3's ANT switch
Fast, bright LED bar graphs for power and status; KXAT100 ATU option adds SWR bar graph
Seamless integration with the Elecraft KX3 transceiver
Works well with any low-power transceiver, requiring only RF and PA KEY inputs
RF-based frequency counter automatically switches bands with any rig
Optional band-data input support the K3/10, KX3, Yaesu FT-817, Icom IC-703, and other rigs
Dual APP power connectors for additional friction-fit if needed (mobile); optional daisy-chaining of 13.8 V to power rig
Optional KXPACBL adapter connects KX3 to the KXPA100 with a single cable for keying, band data, and control
KXPA100's PC port allows use of remote-control and logging applications with the KX3 without software configuration changes
KXAT100 internal ATU option matches 10:1 SWR (5:1 typical on 160 m and 6 m); uses Elecraft's fast matching algorithm
KXAT100 ATU settings saved per band, per band segment, and per antenna for instant recall
Pour les pré-commandes :
http://www.elecraft.com/tmp/kxpa100.htm