... Compléments d'informations concernant la déviation FM pour les tonalités (Wayne Burdick N6KR):
Our objective is to set the default PL tone deviation in the K3 and KX3 to the lowest level that works in virtually all cases (let's say 98-99%, since there are always outliers). Setting it too high can result in the tone being audible in receivers.
If you have a K3 or KX3 outfitted with an internal 2-meter module (or an external transverter on any repeater band), you could help us with this experiment: just try reducing the PL DEViation value to the point where you can no longer reliably key up your local repeaters.
NOTE: If you're doing this with a KX3, please use the current production firmware (rev. 2.18) or later. Earlier releases may not have provided an accurate PL DEV setting. To adjust the PL DEViation, locate the FM DEV menu entry, then tap '1' to switch to PL DEV. This applies to both the K3 and KX3.
Suite à cette 'demande', plusieurs utilisateurs ont déterminé qu'une déviation de seulement 0,15 kHz créée par une tonalité suffisait à activer la plupart des répéteurs. Le module 2 mètres d'Elecraft a un réglage par défaut de 0,36 kHz. Il suffit donc de réduire cette valeur tel que décrit pour le PL (Private Line) tone.